The copper bonded earth rod belongs to the single-piece form of the copper-steel composite. The copper layer is made of copper with a purity of 99.9%, and the steel core is a high-quality carbon structural steel, which forms a composite metal material with high bonding force. It is mainly used for the vertical grounding electrode in the grounding system，which used to reduce the grounding resistance and improve the safety of the grounding system.

Copper-bonded round conductor, coiled type is a type of grounding conductor used in electrical grounding systems. It consists of a copper layer that is electroplated to a steel core. The copper layer provides high conductivity, while the steel core provides strength and durability. The coiled design allows for easy installation and flexibility in routing.

Copper-clad steel (CCS) stranded wire is made of a certain number of copper-clad steel single wire stranded, combining the high tensile strength of steel as the core, copper conductivity for the outer layer.The core material is usually mild steel and is usually used as the inner conductor of ground wires or coaxial cables.

Ground Enhancement Material consists of a variety of components, including fine graphite, bentonite, curing agent, lubricant,conductive cement and so on. It is usually gray and black. It is a good conductive body, it is used between the grounding body and the soil, on the one hand can be close contact with the metal grounding body, forming a large enough current flow surface; On the other hand, it can penetrate into the surrounding soil and reduce the resistivity of the surrounding soil, forming

Light weight, large bearing capacity, the maximum bearing capacity of 5000Kg.
The body is made of green environmental protection, corrosion-resistant, non-toxic and easy to install.
The product can withstand the low temperature of - 40 ℃, which is also applicable in high cold areas.

Excellent performance and fast start-up time Early discharge efficiency Lightning strikes are more accurate, reducing the
probability that the lightning strike point falls on the non-lightning rod body Electrical continuity and functional continuity
can be ensured after repeated lightning discharges Maintenance-free, long life Fully-active intercept lightning system When here's lightning, it activates itself.
High protection level with early discharge function Beautiful appearance

Pre discharge Lightning rod, also known as pre discharge Lightning rod, is a grounding metal rod system vertically installed on the top of the protected body to prevent lightning strikes.A lightning protection device composed of a lightning arrester, down lead, and grounding device. The lightning arrester is installed on the structure and above the protected object, and the load is sensed by the tip in advance with the thunderstorm cloud, and energy is released through。